-----BEGIN PGP SIGNATURE-----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=tLp7
-----END PGP SIGNATURE-----
Merge 4.9.117 into android-4.9
Changes in 4.9.117
Input: elan_i2c - add ACPI ID for lenovo ideapad 330
Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
kvm, mm: account shadow page tables to kmemcg
tracing: Fix double free of event_trigger_data
tracing: Fix possible double free in event_enable_trigger_func()
kthread, tracing: Don't expose half-written comm when creating kthreads
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
tracing: Quiet gcc warning about maybe unused link variable
arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
usb: dwc2: Fix DMA alignment to start at allocated boundary
kcov: ensure irq code sees a valid area
xen/netfront: raise max number of slots in xennet_get_responses()
ALSA: emu10k1: add error handling for snd_ctl_add
ALSA: fm801: add error handling for snd_ctl_add
nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo
vfio: platform: Fix reset module leak in error path
mm: vmalloc: avoid racy handling of debugobjects in vunmap
mm/slub.c: add __printf verification to slab_err()
rtc: ensure rtc_set_alarm fails when alarms are not supported
perf tools: Fix pmu events parsing rule
netfilter: ipset: List timing out entries with "timeout 1" instead of zero
infiniband: fix a possible use-after-free bug
powerpc/eeh: Fix use-after-release of EEH driver
hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()
powerpc/64s: Fix compiler store ordering to SLB shadow area
RDMA/mad: Convert BUG_ONs to error flows
netfilter: nf_tables: check msg_type before nft_trans_set(trans)
pnfs: Don't release the sequence slot until we've processed layoutget on open
disable loading f2fs module on PAGE_SIZE > 4KB
f2fs: fix error path of move_data_page
f2fs: fix to don't trigger writeback during recovery
f2fs: fix to wait page writeback during revoking atomic write
f2fs: Fix deadlock in shutdown ioctl
f2fs: fix race in between GC and atomic open
usbip: usbip_detach: Fix memory, udev context and udev leak
perf/x86/intel/uncore: Correct fixed counter index check in generic code
perf/x86/intel/uncore: Correct fixed counter index check for NHM
selftests/intel_pstate: Improve test, minor fixes
iwlwifi: pcie: fix race in Rx buffer allocator
Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning
Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011
ASoC: dpcm: fix BE dai not hw_free and shutdown
mfd: cros_ec: Fail early if we cannot identify the EC
mwifiex: handle race during mwifiex_usb_disconnect
wlcore: sdio: check for valid platform device data before suspend
media: tw686x: Fix incorrect vb2_mem_ops GFP flags
media: videobuf2-core: don't call memop 'finish' when queueing
btrfs: add barriers to btrfs_sync_log before log_commit_wait wakeups
btrfs: qgroup: Finish rescan when hit the last leaf of extent tree
PCI: Prevent sysfs disable of device while driver is attached
ath: Add regulatory mapping for FCC3_ETSIC
ath: Add regulatory mapping for ETSI8_WORLD
ath: Add regulatory mapping for APL13_WORLD
ath: Add regulatory mapping for APL2_FCCA
ath: Add regulatory mapping for Uganda
ath: Add regulatory mapping for Tanzania
ath: Add regulatory mapping for Serbia
ath: Add regulatory mapping for Bermuda
ath: Add regulatory mapping for Bahamas
powerpc/32: Add a missing include header
powerpc/chrp/time: Make some functions static, add missing header include
powerpc/powermac: Add missing prototype for note_bootable_part()
powerpc/powermac: Mark variable x as unused
powerpc/8xx: fix invalid register expression in head_8xx.S
pinctrl: at91-pio4: add missing of_node_put
bpf: powerpc64: pad function address loads with NOPs
PCI: pciehp: Request control of native hotplug only if supported
net: dsa: qca8k: Add support for QCA8334 switch
mwifiex: correct histogram data with appropriate index
ima: based on policy verify firmware signatures (pre-allocated buffer)
drivers/perf: arm-ccn: don't log to dmesg in event_init
fscrypt: use unbound workqueue for decryption
scsi: ufs: fix exception event handling
ALSA: emu10k1: Rate-limit error messages about page errors
regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops
md: fix NULL dereference of mddev->pers in remove_and_add_spares()
ixgbevf: fix MAC address changes through ixgbevf_set_mac()
media: smiapp: fix timeout checking in smiapp_read_nvm
net: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret value
ALSA: usb-audio: Apply rate limit to warning messages in URB complete callback
arm64: cmpwait: Clear event register before arming exclusive monitor
HID: hid-plantronics: Re-resend Update to map button for PTT products
drm/radeon: fix mode_valid's return type
powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by Starlet
HID: i2c-hid: check if device is there before really probing
EDAC, altera: Fix ARM64 build warning
ARM: dts: emev2: Add missing interrupt-affinity to PMU node
ARM: dts: sh73a0: Add missing interrupt-affinity to PMU node
nvmem: properly handle returned value nvmem_reg_read
tty: Fix data race in tty_insert_flip_string_fixed_flag
dma-iommu: Fix compilation when !CONFIG_IOMMU_DMA
media: rcar_jpu: Add missing clk_disable_unprepare() on error in jpu_open()
libata: Fix command retry decision
media: media-device: fix ioctl function types
media: saa7164: Fix driver name in debug output
mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages
brcmfmac: Add support for bcm43364 wireless chipset
s390/cpum_sf: Add data entry sizes to sampling trailer entry
perf: fix invalid bit in diagnostic entry
bnxt_en: Check unsupported speeds in bnxt_update_link() on PF only.
scsi: 3w-9xxx: fix a missing-check bug
scsi: 3w-xxxx: fix a missing-check bug
scsi: megaraid: silence a static checker bug
staging: lustre: o2iblnd: fix race at kiblnd_connect_peer
thermal: exynos: fix setting rising_threshold for Exynos5433
bpf: fix references to free_bpf_prog_info() in comments
media: siano: get rid of __le32/__le16 cast warnings
drm/atomic: Handling the case when setting old crtc for plane
ALSA: hda/ca0132: fix build failure when a local macro is defined
mmc: dw_mmc: update actual clock for mmc debugfs
mmc: pwrseq: Use kmalloc_array instead of stack VLA
dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC
dt-bindings: net: meson-dwmac: new compatible name for AXG SoC
stop_machine: Use raw spinlocks
memory: tegra: Do not handle spurious interrupts
memory: tegra: Apply interrupts mask per SoC
arm64: defconfig: Enable Rockchip io-domain driver
drm/gma500: fix psb_intel_lvds_mode_valid()'s return type
ipconfig: Correctly initialise ic_nameservers
rsi: Fix 'invalid vdd' warning in mmc
audit: allow not equal op for audit by executable
staging: lustre: llite: correct removexattr detection
staging: lustre: ldlm: free resource when ldlm_lock_create() fails.
serial: core: Make sure compiler barfs for 16-byte earlycon names
microblaze: Fix simpleImage format generation
usb: hub: Don't wait for connect state at resume for powered-off ports
crypto: authencesn - don't leak pointers to authenc keys
crypto: authenc - don't leak pointers to authenc keys
media: omap3isp: fix unbalanced dma_iommu_mapping
scsi: scsi_dh: replace too broad "TP9" string with the exact models
scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOs
media: si470x: fix __be16 annotations
drm: Add DP PSR2 sink enable bit
random: mix rdrand with entropy sent in from userspace
squashfs: be more careful about metadata corruption
ext4: fix inline data updates with checksums enabled
ext4: check for allocation block validity with block group locked
RDMA/uverbs: Protect from attempts to create flows on unsupported QP
net: dsa: qca8k: Force CPU port to its highest bandwidth
net: dsa: qca8k: Enable RXMAC when bringing up a port
net: dsa: qca8k: Add QCA8334 binding documentation
net: dsa: qca8k: Allow overwriting CPU port setting
Linux 4.9.117
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ]
Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.
The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.
However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.
Signed-off-by: Sean Lanigan <sean@lano.id.au>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current io_latency_state structure includes entries for read
and write requests. There are special types of write commands
such as sync and discard (trim) commands, and the current
implementation is not general enough if we want to separate
latency histogram for such special commands.
This change makes io_latency_state structure request-type neutral.
It also changes to print the latency average.
Signed-off-by: Hyojun Kim <hyojun@google.com>
-----BEGIN PGP SIGNATURE-----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=GZkt
-----END PGP SIGNATURE-----
Merge 4.9.54 into android-4.9
Changes in 4.9.54
drm_fourcc: Fix DRM_FORMAT_MOD_LINEAR #define
drm: bridge: add DT bindings for TI ths8135
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
drm/i915: Fix the overlay frontbuffer tracking
ARM: dts: exynos: Add CPU OPPs for Exynos4412 Prime
clk: sunxi-ng: fix PLL_CPUX adjusting on H3
RDS: RDMA: Fix the composite message user notification
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for msiof nodes
MIPS: Ensure bss section ends on a long-aligned address
MIPS: ralink: Fix a typo in the pinmux setup.
MIPS: ralink: Fix incorrect assignment on ralink_soc
power: supply: axp288_fuel_gauge: Fix fuel_gauge_reg_readb return on error
scsi: be2iscsi: Add checks to validate CID alloc/free
ARM: dts: am335x-chilisom: Wakeup from RTC-only state by power on event
igb: re-assign hw address pointer on reset after PCI error
extcon: axp288: Use vbus-valid instead of -present to determine cable presence
reset: ti_syscon: fix a ti_syscon_reset_status issue
sh_eth: use correct name for ECMR_MPDE bit
clk/axs10x: Clear init field in driver probe
usb: make the MTK XHCI driver compile for older MIPS SoCs
hwmon: (gl520sm) Fix overflows and crash seen when writing into limit attributes
iio: adc: imx25-gcq: Fix module autoload
iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
iio: adc: hx711: Add DT binding for avia,hx711
IB/rxe: Add a runtime check in alloc_index()
IB/rxe: Fix a MR reference leak in check_rkey()
ARM: 8635/1: nommu: allow enabling REMAP_VECTORS_TO_RAM
drm/i915/psr: disable psr2 for resolution greater than 32X20
serial: 8250: moxa: Store num_ports in brd
tty: goldfish: Fix a parameter of a call to free_irq
serial: 8250_port: Remove dangerous pr_debug()
IB/ipoib: Fix deadlock over vlan_mutex
IB/ipoib: rtnl_unlock can not come after free_netdev
IB/ipoib: Replace list_del of the neigh->list with list_del_init
arm: dts: mt2701: Add subsystem clock controller device nodes
drm/amdkfd: fix improper return value on error
USB: serial: mos7720: fix control-message error handling
USB: serial: mos7840: fix control-message error handling
sfc: get PIO buffer size from the NIC
partitions/efi: Fix integer overflow in GPT size calculation
ASoC: dapm: handle probe deferrals
audit: log 32-bit socketcalls
ath10k: prevent sta pointer rcu violation
spi: pxa2xx: Add support for Intel Gemini Lake
iommu/arm-smmu: Set privileged attribute to 'default' instead of 'unprivileged'
usb: chipidea: vbus event may exist before starting gadget
rtl8xxxu: Add additional USB IDs for rtl8192eu devices
ASoC: dapm: fix some pointer error handling
drm: mali-dp: Fix destination size handling when rotating
drm: mali-dp: Fix transposed horizontal/vertical flip
HID: wacom: release the resources before leaving despite devm
MIPS: Lantiq: Fix another request_mem_region() return code check
mips: ath79: clock:- Unmap region obtained by of_iomap
lkdtm: Fix Oops when unloading the module
net: core: Prevent from dereferencing null pointer when releasing SKB
net/packet: check length in getsockopt() called with PACKET_HDRLEN
team: fix memory leaks
usb: plusb: Add support for PL-27A1
udp: disable inner UDP checksum offloads in IPsec case
net: dsa: b53: Include IMP/CPU port in dumb forwarding mode
qed: Fix possible system hang in the dcbnl-getdcbx() path.
mmc: sdio: fix alignment issue in struct sdio_func
bridge: netlink: register netdevice before executing changelink
Btrfs: fix segmentation fault when doing dio read
Btrfs: fix potential use-after-free for cloned bio
sata_via: Enable hotplug only on VT6421
hugetlbfs: initialize shared policy as part of inode allocation
kasan: do not sanitize kexec purgatory
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
netfilter: invoke synchronize_rcu after set the _hook_ to NULL
MIPS: IRQ Stack: Unwind IRQ stack onto task stack
iommu/exynos: Block SYSMMU while invalidating FLPD cache
exynos-gsc: Do not swap cb/cr for semi planar formats
MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs
nvme-rdma: handle cpu unplug when re-establishing the controller
netfilter: nfnl_cthelper: fix incorrect helper->expect_class_max
parisc: perf: Fix potential NULL pointer dereference
nfs: make nfs4_cb_sv_ops static
ibmvnic: Free tx/rx scrq pointer array when releasing sub-crqs
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
x86/acpi: Restore the order of CPU IDs
iommu/io-pgtable-arm: Check for leaf entry before dereferencing it
mm/cgroup: avoid panic when init with low memory
rds: ib: add error handle
md/raid10: submit bio directly to replacement disk
netfilter: nf_tables: set pktinfo->thoff at AH header if found
i2c: meson: fix wrong variable usage in meson_i2c_put_data
xfs: remove kmem_zalloc_greedy
ASoC: wm_adsp: Return an error on write to a disabled volatile control
libata: transport: Remove circular dependency at free time
ARM: dts: BCM5301X: Fix memory start address
tools/power turbostat: bugfix: GFXMHz column not changing
IB/qib: fix false-postive maybe-uninitialized warning
ARM: remove duplicate 'const' annotations'
ASoC: rt5514: fix gcc-7 warning
ASoC: rt5659: drop double const
ASoC: rt5660: remove double const
ALSA: au88x0: avoid theoretical uninitialized access
ttpci: address stringop overflow warning
s390/mm: make pmdp_invalidate() do invalidation only
Linux 4.9.54
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 5ef1ecf060f28ecef313b5723f1fd39bf5a35f56 ]
Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be
used for DMA to be 8-byte-aligned. struct sdio_func has an embedded
small DMA buffer not meeting this requirement.
When testing switching to descriptor chain mode in meson-gx driver
SDIO is broken therefore. Fix this by allocating the small DMA buffer
separately as kmalloc ensures that the returned memory area is
properly aligned for every basic data type.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the eMMC 5.0 version of the spec, several EXT_CSD fields about
device lifetime are added.
- Two types of estimated indications reflected by averaged wear out of memory
- An indication reflected by average reserved blocks
Export the information through sysfs.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch adds a new sysfs node (latency_hist) and reports
IO (svc time) latency histograms. Disabled by default, can be
enabled by echoing 0 into latency_hist, stats can be cleared
by writing 2 into latency_hist. This commit fixes the 32 bit
build breakage in the previous commit. Tested on both 32 bit
and 64 bit arm devices. (Merged from android4.4-common).
Bug: 30677035
Change-Id: I9403ea093f4cd54ebae08f12a11d01ef153118d0
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Change-Id: Ibff2e3e991e5522f55ec8c6edc25ed09f2553736
Signed-off-by: San Mehat <san@google.com>
- Add support for sending commands during data transfer
- Erase/discard/trim improvements
- Improved error handling
- Extend sysfs with SD status register
- Document info about the vmmc/vmmcq regulators
- Extend pwrseq-simple to manage an optional post-power-on-delay
- Some various minor improvements and cleanups
MMC host:
- dw_mmc: Add reset support
- dw_mmc: Return -EILSEQ for EBE and SBE error
- dw_mmc: Some cleanups
- dw_mmc-k3: Add UHS-I support Hisilicon Hikey
- tmio: Add eMMC support
- sh_mobile_sdhi: Add r8a7796 support
- sunxi: Don't use sample clocks for sun4i/sun5i
- sunxi: Add support for A64 mmc controller
- sunxi: Some cleanups and improvements
- sdhci: Support for sending commands during data transfer
- sdhci: Do not allow tuning procedure to be interrupted
- sdhci-pci: Enable SD/SDIO on Merrifield
- sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR
- sdhci-pci: Some cleanups
- sdhci-of-arasan: Set controller to test mode when no CD bit
- sdhci-of-arasan: Some fixes for clocks and phys
- sdhci-brcmstb: Don't use ADMA 64-bit when not supported
- sdhci-tegra: Mark 64-bit DMA broken on Tegra124
- sdhci-esdhc-imx: Fixups related to data timeouts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJX9NVDAAoJEP4mhCVzWIwpjCAP/Am7i2zfql9Gq/rhbrcp7dTe
eTWnz/nuadqGV8p4DCMP+SzTZQpKrP1+mihnpoxDy7o+VLsu6YLrQ5xD/YBCv40j
6Fat0fK1Cym1QSFW7nPjTL2qUAt5BbNJbiMHwqFupXpdtoFuVsMCOWJJktno1QW6
VkAdsr2mbamY6nlpVV0INlJuss2Hqh05PEEYISHdbYxSCjMWsTZm7p2Eghkuwics
dZMVxkLIw93BRxLf91b7s6dVerYGfKAq16pV3dmeejtW9vNwcmSGQMcMbTRZHOSl
CtMhx1Qw88vYtGgl3LV0mKa+2/06ZWNG9ZwakuNTQZI5khVjmGuwJDINpEBq/lcC
0QXNLhzx+Z4h+s2iY02Xv5k0tywcHlG9blIPXE6z3O1nsFVdXjyUQ5KcM9w8rbcS
X4auw3ERLoVgyPgK1gKKax1z8dO7JnvmwFZYgVZxsbj7lIYr+2xs42R5R3enDzmt
HPLDvqiM4RQKbpZxaiCos3XcrBs258SpPoHQSl5JyCYsYhAfQKcOZWdJpIr3BK7d
SRQupbEzK160i6Umz6+VU15CFnaBqD3Atab4XTEt/GBY+RbzK/FeWKpeYIrPV8xe
GSi3WN+BwIi3tczg8J81CBgr0gFqOh7VNz0lmvrm+YqvARAmRqJxIijNWU4ZwGdi
Q1gOTVWSveyIM87PhMhG
=b0/p
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
MMC core:
- Add support for sending commands during data transfer
- Erase/discard/trim improvements
- Improved error handling
- Extend sysfs with SD status register
- Document info about the vmmc/vmmcq regulators
- Extend pwrseq-simple to manage an optional post-power-on-delay
- Some various minor improvements and cleanups
MMC host:
- dw_mmc: Add reset support
- dw_mmc: Return -EILSEQ for EBE and SBE error
- dw_mmc: Some cleanups
- dw_mmc-k3: Add UHS-I support Hisilicon Hikey
- tmio: Add eMMC support
- sh_mobile_sdhi: Add r8a7796 support
- sunxi: Don't use sample clocks for sun4i/sun5i
- sunxi: Add support for A64 mmc controller
- sunxi: Some cleanups and improvements
- sdhci: Support for sending commands during data transfer
- sdhci: Do not allow tuning procedure to be interrupted
- sdhci-pci: Enable SD/SDIO on Merrifield
- sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR
- sdhci-pci: Some cleanups
- sdhci-of-arasan: Set controller to test mode when no CD bit
- sdhci-of-arasan: Some fixes for clocks and phys
- sdhci-brcmstb: Don't use ADMA 64-bit when not supported
- sdhci-tegra: Mark 64-bit DMA broken on Tegra124
- sdhci-esdhc-imx: Fixups related to data timeouts
* tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits)
mmc: dw_mmc: remove the deprecated "supports-highspeed" property
mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth
mmc: dw_mmc: use macro to define ring buffer size
mmc: dw_mmc: fix misleading error print if failing to do DMA transfer
mmc: dw_mmc: avoid race condition of cpu and IDMAC
mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64
mmc: core: don't try to switch block size for dual rate mode
mmc: sdhci-of-arasan: Set controller to test mode when no CD bit
dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd
mmc: tmio: add eMMC support
mmc: rtsx_usb: use new macro for R1 without CRC
mmc: rtsx_pci: use new macro for R1 without CRC
mmc: add define for R1 response without CRC
mmc: card: do away with indirection pointer
mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
mmc: sdhci: Support cap_cmd_during_tfr requests
mmc: mmc_test: Add tests for sending commands during transfer
mmc: core: Add support for sending commands during data transfer
mmc: sdhci-brcmstb: Fix incorrect capability
...
The core uses it for polling. Give drivers a proper define handle this
case like for other response types.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A host controller driver exposes its capability using caps flag
MMC_CAP_CMD_DURING_TFR. A driver with that capability can accept requests
that are marked mrq->cap_cmd_during_tfr = true. Then the driver informs the
upper layers when the command line is available for further commands by
calling mmc_command_done(). Because of that, the driver will not then
automatically send STOP commands, and it is the responsibility of the upper
layer to send a STOP command if it is required.
For requests submitted through the mmc_wait_for_req() interface, the caller
sets mrq->cap_cmd_during_tfr = true which causes mmc_wait_for_req() in fact
not to wait. The caller can then send commands that do not use the data
lines. Finally the caller can wait for the transfer to complete by calling
mmc_wait_for_req_done() which is now exported.
For requests submitted through the mmc_start_req() interface, the caller
again sets mrq->cap_cmd_during_tfr = true, but mmc_start_req() anyway does
not wait. The caller can then send commands that do not use the data
lines. Finally the caller can wait for the transfer to complete in the
normal way i.e. calling mmc_start_req() again.
Irrespective of how a cap_cmd_during_tfr request is started,
mmc_is_req_done() can be called if the upper layer needs to determine if
the request is done. However the appropriate waiting function (either
mmc_wait_for_req_done() or mmc_start_req()) must still be called.
The implementation consists primarily of a new completion
mrq->cmd_completion which notifies when the command line is available for
further commands. That completion is completed by mmc_command_done().
When there is an ongoing data transfer, calls to mmc_wait_for_req() will
automatically wait on that completion, so the caller does not have to do
anything special.
Note, in the case of errors, the driver may call mmc_request_done() without
calling mmc_command_done() because mmc_request_done() always calls
mmc_command_done().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Dwmmc host controller may in unknown state when entering kernel boot. One
example is when booting from eMMC, bootloader need initialize MMC host
controller into some state so it can read. In order to make sure MMC host
controller in a clean initial state, this reset support is added.
With this patch, a 'resets' property can be added into dw_mmc device
tree node. The hardware logic is: dwmmc host controller IP receives a reset
signal from a 'reset provider' (eg. power management unit). The 'resets'
property points to this reset signal. So, during dwmmc driver probe,
it can use this signal to reset itself.
Refer to [1] for more information.
[1] Documentation/devicetree/bindings/reset/reset.txt
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SD Status register contains several important fields related to the
SD Card proprietary features.
Those fields may be used by user space applications for vendor specific
usage.
None of those fields are exported today by the driver to user space.
In this patch, we are reading the SD Status register and exporting
(using MMC_DEV_ATTR) the SD Status register to the user space.
Signed-off-by: Uri Yanai <uri.yanai@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver already supports the bcm4339 chipset but only for the variant
that shares the same modalias as the bcm4335, ie. sdio:c00v02D0d4335.
It turns out that there are also bcm4339 devices out there that have a
more distiguishable modalias sdio:c00v02D0d4339.
Reported-by: Steve deRosier <derosier@gmail.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Host drivers which needs to valdiate for non-supported MMC
commands and returnn error code for such requests.
To improve and simplify the behaviour, let's invent MMC_CAP2_NO_MMC
which these host drivers can set to tell the mmc core to skip sending MMC
commands during card initialization.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove the quirks flag. (DW_MCI_QUIRK_BROKEN_DTO)
For removing this, enabled the dto_timer by defaults.
It doesn't see any I/O performance degression.
In future, dwmmc controller should not use the quirks flag.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are host drivers which needs to valdiate for non-supported SD
commands and returnn error code for such requests.
To improve and simplify the behaviour, let's invent MMC_CAP2_NO_SD
which these host drivers can set to tell the mmc core to skip sending SD
commands during card initialization.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Certain Hynix eMMC 4.41 cards might get broken when HPI feature is used
and hence this patch disables the HPI feature for such buggy cards.
As some of the other features like BKOPs/Cache/Sanitize are dependent on
HPI feature, those features would also get disabled if HPI is disabled.
Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
[gdavis: Forward port and cleanup]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Controllers use data strobe line to latch data from devices
under hs400 mode, but not for cmd line. So since emmc 5.1, JEDEC
introduces enhanced strobe mode for latching cmd response from
emmc devices to host controllers. This new feature is optional,
so it depends both on device's cap and host's cap to decide
whether to use it or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch introduce mmc-hs400-enhanced-strobe for platforms
which want to enable enhanced strobe function from DT if the
mmc host controller claims to support enhanced strobe.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zHa6
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.7 rc1. They are based on a
commit earlier in the merge window and have been tested in linux-next
for a while.
MMC core:
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly"
* tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: longer timeout for long read time quirk
mmc: dw_mmc: rockchip: Set the drive phase properly
mmc: dw_mmc: fix the wrong max_blk_size
mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities
mmc: sdhci-acpi: Ensure connected devices are powered when probing
ACPI / PM: Export acpi_device_fix_up_power()
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
Major changes:
iwlwifi
* remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option
* work for RX multiqueue continues
* dynamic queue allocation work continues
* add Luca as maintainer
* a bunch of fixes and improvements all over
brcmfmac
* add 4356 sdio support
ath6kl
* add ability to set debug uart baud rate with a module parameter
wil6210
* add debugfs file to configure firmware led functionality
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJXNbEBAAoJEG4XJFUm622bKfAH/2CnQV7dBCT5QwEiKYoOdsCR
eTiH7OYjTPw/rjKaG3laFgFbecnfUnHoGt55WKqRY58JycLza+SPTTv57hFTnOl+
4kDhUEjUggxMs5BRb3H7wtcnQVs/pTkgqKqwUrmFNkG6idENQgorK6DG4SNCwIdf
JrmxiHcN73xSATxlduoA9bGpluW3OvnFfRrJfyT6UBWZaFqFe3qsoKDx08S2WU2z
kUI9ZUO9Ht7Q85QdLfPQI7xo54dXo9a+8v3yc7fNFbcu1s8cqeYuofXfypjK7H/B
DEY96mubDnmDt8YE8yR9wStVzTr5zf39urE3o+/xSKSKhQxmNo8+x2TBSm5nFSQ=
=0HKi
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2016-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers patches for 4.7
Major changes:
iwlwifi
* remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option
* work for RX multiqueue continues
* dynamic queue allocation work continues
* add Luca as maintainer
* a bunch of fixes and improvements all over
brcmfmac
* add 4356 sdio support
ath6kl
* add ability to set debug uart baud rate with a module parameter
wil6210
* add debugfs file to configure firmware led functionality
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-tuning is not possible when switched to the RPMB
partition. However re-tuning should not be needed
if re-tuning is done immediately before switching,
a small set of operations is done, and then we
immediately switch back to the main partition.
To ensure that re-tuning can't be done for a short
while, add a facility to "pause" re-tuning.
The existing facility to hold / release re-tuning
is used but it also flags re-tuning as needed to cause
re-tuning before the next command (which will be the
switch to RPMB).
We also need to "unpause" in the recovery path, which
is catered for by adding it to mmc_retune_disable().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A few SH boards include the file but don't make use of it (no named
interrupts). The SDHI code removed support for this feature as well.
So, drop the references and ultimately remove the unneeded file.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rich Felker <dalias@libc.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is no reason to have a public and private header file. Merge them
into a private one, so looking up symbols is less confusing.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
EVENT_XFER_ERROR isn't been used now, so it can be removed.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Try to fix the warning reported by:
scripts/kernel-doc -man -v include/linux/mmc/dw_mmc.h > /dev/null
warning: No description found for parameter 'irq_lock'
warning: No description found for parameter 'stop_abort'
warning: No description found for parameter 'prev_blksz'
warning: No description found for parameter 'timing'
warning: No description found for parameter 'ring_size'
warning: No description found for parameter 'dms'
warning: No description found for parameter 'phy_regs'
warning: No description found for parameter 'fifoth_val'
warning: No description found for parameter 'vqmmc_enabled'
warning: No description found for parameter 'cmd11_timer'
warning: Excess struct/union/enum/typedef member 'card_tasklet'
description in 'dw_mci'
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While here, refactor the comments so that they are before the
declaration they are referring to.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Based on work by Shinobu Uehara and Ben Dooks. This adds the voltage
switch operation needed for all UHS-I modes, but not the tuning needed
for SDR-104 which will come later.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
dw_mmc already use mmc_of_parse to get "broken-cd" property,
but it considered "broken-cd" to be a quirk in its driver. We
don't need this quirk here, and just take what we need from
mmc->caps.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch removes struct block_settings since
it's never used anywhere.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some of the indentation made the code awful to read. Fix that. Also,
introduce defines instead of magic hex values. Note that this includes
one change: We mask out know 0xff instead of 0x1ff. But 0x100 has always
been the clock enable bit. It doesn't make any sense to set it depending
on the clock calculation. Update copyright notices, too. I'll be working
on those files some more in the future.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It's not set to MMC_DATA_STREAM anywhere.
It seems that it had been used with CMD11/CMD20.
But according to Spec, CMD11/CMD20 are obsolete command.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The dw_mmc driver stores the physical address of the MMIO registers
in a pointer, which requires the use of type casts, and is actually
broken if anyone ever has this device on a 32-bit SoC in registers
above 4GB. Gcc warns about this possibility when the driver is built
with ARM LPAE enabled:
mmc/host/dw_mmc.c: In function 'dw_mci_edmac_start_dma':
mmc/host/dw_mmc.c:702:17: warning: cast from pointer to integer of different size
cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
^
mmc/host/dw_mmc-pltfm.c: In function 'dw_mci_pltfm_register':
mmc/host/dw_mmc-pltfm.c:63:19: warning: cast to pointer from integer of different size
host->phy_regs = (void *)(regs->start);
This changes the code to use resource_size_t, which gets rid of the
warning, the bug and the useless casts.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch introduce a new MMC_CAP2_NO_SDIO cap used to tell the mmc
core to not send SDIO specific commands.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of checking for "#ifdef" directly in the code, let's invent a pair
of mmc core functions to deal with register/unregister the MMC PM notifier
block. Implement stubs for these functions when CONFIG_PM_SLEEP is unset,
as in that case the PM notifiers isn't used.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The mmc_execute_tuning() has already prepared the opcode,
there is no need to prepare it again at mmc_send_tuning(),
and, there is a BUG of mmc_send_tuning() to determine the opcode
by bus width, assume eMMC was running at HS200, 4bit mode,
then the mmc_send_tuning() will overwrite the opcode from CMD21
to CMD19, then got error.
in addition, extend an argument of "cmd_error" to allow getting
if there was cmd error when tune response.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
[Ulf: Rebased patch]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller can supports two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to support these platforms. I've tested it on RK31xx
platform with edmac mode and RK3288 platform with idmac mode.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This adds logic to the MMC core to set VQMMC. This is expected to be
called by MMC drivers like dw_mmc as part of (or instead of) their
start_signal_voltage_switch() callback.
A few notes:
* When setting the signal voltage to 3.3V we do our best to make VQMMC
and VMMC match. It's been reported that this makes some old cards
happy since they were tested back in the day before UHS when VQMMC
and VMMC were provided by the same regulator. A nice side effect of
this is that we don't end up on the hairy edge of VQMMC (2.7V),
which some EEs claim is a little too close to the minimum for
comfort.
This is done in two steps. At first we try to find a VQMMC within
a 0.3V tolerance of VMMC and if this is not supported by the
supplying regulator we try to find a suitable voltage within the
whole 2.7V-3.6V area of the spec.
* The two step approach is currently necessary, as the used
regulator_set_voltage_triplet(min, target, max) uses a simple
implementation that just tries two basic steps:
regulator_set_voltage(target, max);
regulator_set_voltage(min, target);
So with only one step with 2.7-3.6V borders, if a suitable voltage
is a bit below VMMC, we would directly get the lowest 2.7V
which some boards (like Rockchips) don't like at all.
* When setting the signal voltage to 1.8V or 1.2V we aim for that
specific voltage instead of picking the lowest one in the range.
* We very purposely don't print errors in mmc_regulator_set_vqmmc().
There are cases where the MMC core will try several different
voltages and we don't want to pollute the logs.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MMC_CLKGATE was once invented to save power by gating the bus clock at
request inactivity. At that time it served its purpose. The modern way to
deal with power saving for these scenarios, is by using runtime PM.
Nowadays, several host drivers have deployed runtime PM, but for those
that haven't and which still cares power saving at request inactivity,
it's certainly time to deploy runtime PM as it has been around for several
years now.
To simplify code to mmc core and thus decrease maintenance efforts, this
patch removes all code related to MMC_CLKGATE.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
As there are no users of the __mmc_switch() API, except for the mmc core
itself, let's convert it from an exported function into an internal.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For some mass production of kingston eMMCs which adopt Phison's
firmware will meet an unrecoverable data conrruption occasionally
if performing trim due to a firmware bug confirmed by vendor. We
found it on Intel-C3230RK platform. So we add fixup of broken trim
for it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch add a new quirk to add a s/w timer to notify the driver
to terminate current transfer and report a data timeout to the core,
if DTO interrupt does NOT come within the given time.
dw_mmc call mmc_request_done func to finish transfer depends on
DTO interrupt. If DTO interrupt does not come in sending data state,
the current transfer will be blocked.
We got the reply from synopsys:
There are two counters but both use the same value of [31:8] bits.
Data timeout counter doesn't wait for stop clock and you should get
DRTO even when the clock is not stopped.
Host Starvation timeout counter is triggered with stop clock condition.
This means that host should get DRTO and DTO interrupt.
But this case really exists, when driver reads tuning data from
card on RK3288-pink2 board. I measured waveforms by oscilloscope
and found that card clock was always on and data lines were always
holded high level in sending data state.
There are two possibility that data over interrupt doesn't come in
reading data state on RK3X SoCs:
- get command done interrupt, but doesn't get any data-related interrupt.
- get data error interrupt, but doesn't get data over interrupt.
Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
