exynos-linux-stable/include/linux/if_pppox.h

117 lines
3.3 KiB
C
Raw Normal View History

/***************************************************************************
* Linux PPP over X - Generic PPP transport layer sockets
* Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516)
*
* This file supplies definitions required by the PPP over Ethernet driver
* (pppox.c). All version information wrt this file is located in pppox.c
*
* License:
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#ifndef __LINUX_IF_PPPOX_H
#define __LINUX_IF_PPPOX_H
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/ppp_channel.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <uapi/linux/if_pppox.h>
static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
{
return (struct pppoe_hdr *)skb_network_header(skb);
}
struct pppoe_opt {
struct net_device *dev; /* device associated with socket*/
int ifindex; /* ifindex of device associated with socket */
struct pppoe_addr pa; /* what this socket is bound to*/
struct sockaddr_pppox relay; /* what socket data will be
relayed to (PPPoE relaying) */
struct work_struct padt_work;/* Work item for handling PADT */
};
struct pptp_opt {
struct pptp_addr src_addr;
struct pptp_addr dst_addr;
u32 ack_sent, ack_recv;
u32 seq_sent, seq_recv;
int ppp_flags;
};
struct pppolac_opt {
__u32 local;
__u32 remote;
__u16 sequence;
__u8 sequencing;
ANDROID: net: PPPoPNS and PPPoLAC fixes. net: Fix a bitmask in PPPoPNS and rename constants in PPPoPNS and PPPoLAC. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Fix a potential deadlock while releasing PPPoLAC/PPPoPNS socket. PPP driver guarantees that no thread will be executing start_xmit() after returning from ppp_unregister_channel(). To achieve this, a spinlock (downl) is used. In pppolac_release(), ppp_unregister_channel() is called after sk_udp is locked. At the same time, another thread might be running in pppolac_xmit() with downl. Thus a deadlock will occur if the thread tries to lock sk_udp. The same situation might happen on sk_raw in pppopns_release(). Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Force PPPoLAC and PPPoPNS to bind an interface before creating PPP channel. It is common to manipulate the routing table after configuring PPP device. Since both PPPoLAC and PPPoPNS run over IP, care must be taken to make sure that there is no loop in the routing table. Although this can be done by adding a host route, it might still cause problems when the interface is down for some reason. To solve this, this patch forces both drivers to bind an interface before creating PPP channel, so the system will not re-route the tunneling sockets to another interface when the original one is down. Another benefit is that now the host route is no longer required, so there is no need to remove it when PPP channel is closed. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Avoid sleep-inside-spinlock in PPPoLAC and PPPoPNS. Since recv() and xmit() are called with a spinlock held, routines which might sleep cannot be used. This issue is solved by following changes: Incoming packets are now processed in backlog handler, recv_core(), instead of recv(). Since backlog handler is always executed with socket spinlock held, the requirement of ppp_input() is still satisfied. Outgoing packets are now processed in workqueue handler, xmit_core(), instead of xmit(). Note that kernel_sendmsg() is no longer used to prevent touching dead sockets. In release(), lock_sock() and pppox_unbind_sock() ensure that no thread is in recv_core() or xmit(). Then socket handlers are restored before release_sock(), so no packets will leak in backlog queue. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Fix msg_iovlen in PPPoLAC and PPPoPNS. Although any positive value should work (which is always true in both drivers), the correct value should be 1. Signed-off-by: Chia-chi Yeh <chiachi@android.com>
2009-06-13 02:29:04 +08:00
int (*backlog_rcv)(struct sock *sk_udp, struct sk_buff *skb);
};
struct pppopns_opt {
__u16 local;
__u16 remote;
__u32 sequence;
ANDROID: net: PPPoPNS and PPPoLAC fixes. net: Fix a bitmask in PPPoPNS and rename constants in PPPoPNS and PPPoLAC. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Fix a potential deadlock while releasing PPPoLAC/PPPoPNS socket. PPP driver guarantees that no thread will be executing start_xmit() after returning from ppp_unregister_channel(). To achieve this, a spinlock (downl) is used. In pppolac_release(), ppp_unregister_channel() is called after sk_udp is locked. At the same time, another thread might be running in pppolac_xmit() with downl. Thus a deadlock will occur if the thread tries to lock sk_udp. The same situation might happen on sk_raw in pppopns_release(). Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Force PPPoLAC and PPPoPNS to bind an interface before creating PPP channel. It is common to manipulate the routing table after configuring PPP device. Since both PPPoLAC and PPPoPNS run over IP, care must be taken to make sure that there is no loop in the routing table. Although this can be done by adding a host route, it might still cause problems when the interface is down for some reason. To solve this, this patch forces both drivers to bind an interface before creating PPP channel, so the system will not re-route the tunneling sockets to another interface when the original one is down. Another benefit is that now the host route is no longer required, so there is no need to remove it when PPP channel is closed. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Avoid sleep-inside-spinlock in PPPoLAC and PPPoPNS. Since recv() and xmit() are called with a spinlock held, routines which might sleep cannot be used. This issue is solved by following changes: Incoming packets are now processed in backlog handler, recv_core(), instead of recv(). Since backlog handler is always executed with socket spinlock held, the requirement of ppp_input() is still satisfied. Outgoing packets are now processed in workqueue handler, xmit_core(), instead of xmit(). Note that kernel_sendmsg() is no longer used to prevent touching dead sockets. In release(), lock_sock() and pppox_unbind_sock() ensure that no thread is in recv_core() or xmit(). Then socket handlers are restored before release_sock(), so no packets will leak in backlog queue. Signed-off-by: Chia-chi Yeh <chiachi@android.com> net: Fix msg_iovlen in PPPoLAC and PPPoPNS. Although any positive value should work (which is always true in both drivers), the correct value should be 1. Signed-off-by: Chia-chi Yeh <chiachi@android.com>
2009-06-13 02:29:04 +08:00
void (*data_ready)(struct sock *sk_raw, int length);
int (*backlog_rcv)(struct sock *sk_raw, struct sk_buff *skb);
};
#include <net/sock.h>
struct pppox_sock {
/* struct sock must be the first member of pppox_sock */
struct sock sk;
struct ppp_channel chan;
struct pppox_sock *next; /* for hash table */
union {
struct pppoe_opt pppoe;
struct pptp_opt pptp;
struct pppolac_opt lac;
struct pppopns_opt pns;
} proto;
__be16 num;
};
#define pppoe_dev proto.pppoe.dev
#define pppoe_ifindex proto.pppoe.ifindex
#define pppoe_pa proto.pppoe.pa
#define pppoe_relay proto.pppoe.relay
static inline struct pppox_sock *pppox_sk(struct sock *sk)
{
return (struct pppox_sock *)sk;
}
static inline struct sock *sk_pppox(struct pppox_sock *po)
{
return (struct sock *)po;
}
struct module;
struct pppox_proto {
int (*create)(struct net *net, struct socket *sock, int kern);
int (*ioctl)(struct socket *sock, unsigned int cmd,
unsigned long arg);
struct module *owner;
};
extern int register_pppox_proto(int proto_num, const struct pppox_proto *pp);
extern void unregister_pppox_proto(int proto_num);
extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */
extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
/* PPPoX socket states */
enum {
PPPOX_NONE = 0, /* initial state */
PPPOX_CONNECTED = 1, /* connection established ==TCP_ESTABLISHED */
PPPOX_BOUND = 2, /* bound to ppp device */
PPPOX_RELAY = 4, /* forwarding is enabled */
PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/
};
#endif /* !(__LINUX_IF_PPPOX_H) */